Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Shimano 11-Speed Chain Quick Link
$16.99
QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
Shimano 12-Speed Chain Quick Link
$13.99
- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use
SRAM Guide Ultimate Hose Kit
$49.00
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
SRAM Power Link Chain Connector
$4.99 - $18.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$4.99 - $18.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Eagle Chain Connector 12-Speed
$4.99 - $18.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
RockShox 32mm Seal Kit
$27.00
RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.
RockShox RockShox 8mm Crush Washer Retainer, Qty 50
$12.00
Replacement lower hardware for Rockshox forks.
RockShox RockShox 8mm Crush Washers, Qty 50
$11.00
Replacement lower hardware for Rockshox forks.
RockShox RockShox Reverb A1-B1, Reverb Stealth A2-C1, Reverb AXS IFP Height Tool, 210 mm Length
$9.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post
Problem Solvers 1-1/8-inch Headset Spacers
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Problem Solvers Center Lock to 6-Bolt Rotor Adapter Kit - 12 – 20mm Axle
$24.99
The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors
OneUp Components EDC Top Cap
$33.50
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers
Magura Magura MT Brake Service Tackle Box
$76.80
Magura service kits come in a variety of packages to fit your needs.
Magura Magura Shiftmix 3 Handlebar Clamp - SRAM Matchmaker Shifters, Right
$37.11
Shiftmix adaptors allow a shifter to clamp directly to a Magura brake lever, expanding setup possibilities.
KMC MissingLink 12-Speed
$10.00 - $12.00
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
Jagwire Brake or Shift Cable Tips
$4.49 - $44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
FOX FOX Air Shaft Assembly - 38, 170, InrSlv, '21
$130.00
38 Air Shaft Assembly for Fox suspension forks.
FOX Factory Rebuild Kit for Float Rear Shocks
$20.00
Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild
FOX Transfer 1x Dropper Post Remote
$69.00
Transfer Dropper Post Remote A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat. - 22.2 1x Remote I-Spec EV
Enduro ABEC 3 Cartridge Bearing 6802
$5.92
- Grade 10 chromium steel balls
Enduro ABEC 3 Cartridge Bearing 6902
$5.92
- Grade 10 chromium steel balls
Enduro ABEC 3 Cartridge Bearing 6903
$6.52
- Grade 10 chromium steel balls
DT Swiss Ratchet Freehub Body
$99.60
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles
Avid Post-Mount Disc Brake Adaptor
$27.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
e*thirteen BB92/BB107/BB121 Bottom Bracket All E*13 Cranks
$69.95
e*thirteen Press Fit Bottom Brackets - Adapts all e-thirteen and older Fifteen.G cranks to BB89.5 BB92 frames - Custom angular contact bearings TiNi models feature Ti Nitride races - EV-8015 includes chainline spacer kit for LG1 and non-APS cranks - e*thirteen's BB92 bottom bracket uses industry-exclusive dual-row bearings to fit big performance into a small BB shell - A center tube helps seal the BB shell - For 41mm ID pressfit frames - Bearings feature high-performance seals, and a custom grease specification delivers supreme durability and smooth spinning performance
absoluteBLACK Integrated Headset Top Cap and Bolt
$19.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug
Page 1 of 59 Next page