BMX Parts

When you can’t even see a part, you might forget about it, but it doesn’t mean its not important. Flat tires are probably the most common bicycle failures. Many times, flats are caused by the rims, specifically the lack of protection from the rims' sharp edges. Good rim strips didn’t exist for BMX rims. They work well and improve the function of any 20 inch rim. If you forget about them, that means they are doing their job.

Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

The Graduate sleeve is the replacement sleeve for the Graduate peg that's made from long lasting, fast sliding plastic. - Sold singly

The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible

Seeley BMX Peg

- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

The MK 4 version continues the GLAND’s heritage, but in a smaller and sleeker overall size which should appease many riders. The images beside show the top, profile, and under side of each guard.

- Press fit designed to work the hub's non-drive side collar.

The Gost pads feature a unique design to make install and set up easier. - Improved stiffness by built in toe-in into the pad shape and using a solid extruded aluminum frame - Assembly is simplified by lining up the rim and tightening a M6 female bolt

The Slim by Four brake pads feature a symmetric shape designed for both forwards and backwards braking. - Custom inner frame helps to stiffen the pad, reducing braking power loss from flex

Cornerstone Grip features a ribbed design with Cornerstone logo. - Includes Odyssey Par Ends

Broc Raiford signature grips feature a comfortable ribbed design and smooth ends for improved wear resistance. - 160mm lenght - Par Ends Included

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

The Springfield lever features an easy to install and remove design. - Easy to install and remove without having to wrestle grips on and off - Die-cast clamp design

Initially designed for the European market’s UCI races, these are also a requirement for USABMX Nationals. The Box Two Side Number Plates are shaped from embossed foam and feature full-color printed graphics. They comply with UCI regulations and fit all bicycle frames. Hook-and-loop straps combined with a piece of adhesive-backed hook-and-loop tape hold the plates firmly in place. They have a black with a white background (colored backgrounds are available separately).

The new Gsport Uniguard is a simple, inexpensive functional guard that eliminates the need to spread the dropouts. It’s made from Heat-Treated Cr-Mo Steel and is LHD and RHD compatible as well as Drive and Non-Drive compatible. All bases covered. Available in 14mm or 3/8?.

Replacement sleeves for Dill Pickle pegs.

This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length. - Black

Odyssey took their proven Linear Slic Kable housing and replaced the steel linear wire with aluminum. Utilizing the aluminum wire in the housing saves you significant weight, roughly 30%. This cable also features their specially designed “volcano” ferrules that they’ve used since 2008 to prevent housing blowouts. This Kable also comes with color-coaded inner wires and ball ends to differentiate between their regular Linear’s Race Linear Slic Kable. - Length: 60 – 65mm - Black

- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)

The Odyssey Springfield brake features a one spring design to make brake installation and set up simple and easy. - For rear use only

Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series?

Designed by the infamous Rich Lee, the Box Two plates are injected in an impact-resistant and colorfast resin. The airflow ports are artfully sculpted to both reduce weight and drag. Each plate includes hook-and-loop closures secured in place with custom Box rivets. Did you know that these stylish creations are also the official number plate of the UCI/GSX Super Cross Series? FEATURES - Hook & Loop Velcro Straps - Steel Rivets - Replaceable Number Pallet SPECIFICATIONS - Size: Small // Large - Dimensions: 6.5 x 9 inches (Small) // 8.25 x 9.5 inches (Large) - Weight: 84 g / 2.96 oz (Small) // 95 g / 3.35 oz

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life

This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.

- Designed and tested by multi-time World Cup Downhill Champion Aaron Gwin
- Low-profile design improves aerodynamics and rider visibility
- Curved shape routes rear cables cleanly behind the plate
- Durable, flexible fiber-reinforced polymer construction
- Easy, tool-less installation using zip-ties (not included)
- Available in five colors Black, Blue, Red, Orange, Grey

Designed and tested by Aaron Gwin to exceed the demands of world-class racing. - Curved profile provides better aero performance - Low profile design allows for a full field of vision - Durable and flexible reinforced polymer construction - Easy installation and removal using zip ties