Tools

- E-bike socket designed for installing and removing compatible cassettes on Bafang hub-drive motors without removing motor wiring - Center clearance for E-Bike wiring is 0.812". 12-spline 23mm OD tool fittings - Made in the USA

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm

Designed to save the mechanic time and money, our new Ebike lockring sockets are machined to match manufacturer specifications and designed to be used with a 1/2” drive socket or torque wrench for easy installation and removal of Ebike lockrings.

• Precision machined aluminum body
• Anodized in Wheels MFG red

A must have for any work bench. Retractable tape measure fits easily in your pocket so you can quickly and accurately measure anything! - 60-inch (150 cm) long with metric on one side and English on the other

Introducing the Thru Axle Gauge your new best friend when it comes to simple thru-axle measurements and identification, especially if you're a regular Joe or have a small bike shop. This handy tool is all about simplicity and getting the job done right without any fuss. Here's what makes it great. Built to Last: Made from tough red acrylic, this ruler can handle whatever you throw at it. It's durable and reliable, so you can trust it to stick around for the long haul. Easy Length Measurement: With a metric ruler that goes up to 225mm, you can measure the length of thru axles with precision. Whether it's frames or forks, you'll get accurate measurements every time. Quick Axle Diameter Check: Need to know the diameter of your thru-axle? No problem. This tool comes with gauges for both 12mm and 15mm axles, so you can figure it out in a snap. No More Guesswork: Say goodbye to guessing thread pitches. This ruler has gauges for the three most common thru-axle threads 1.0, 1.5, and 1.75. You'll always know exactly what you're working with. Versatile use even if you don't have an axle handy, this ruler can still help you out. It's designed to measure frames and forks, so you can get the job done even when the axle is missing in action. The Thru Axle Gauge is here to simplify your bike maintenance tasks without breaking the bank. It's perfect for small shops or anyone who wants reliable measurements without all the fancy bells and whistles. Upgrade your toolkit today and see how much easier bike maintenance can be with the Thru Axle Gauge by your side. Tech Specs: Red Acrylic Thread Pitch Measurements 1.0 1.5 1.75 Axle Diameter Measurements 12mm 15mm Metric Ruler 0-225mm

A collection of all the service parts needed for repair and service of the popular SRAM brake models.

• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- RockShox, 11.4118.038.002, Service kit, Monarch Plus B1 2014+

Rear Shock Service Kit Full- Monarch With Autosag Specialized B1

RockShox 30mm Seal Kit

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals

200 HOUR/1 YEAR SERVICE KIT (INCLUDES SEALHEAD SEALS, PISTON SEAL, GLIDE RINGS, IFP SEALS) - SUPER DELUXE COIL B1 (2023+)/DELUXE COIL B1 (2023+)

Universal Fork Vise Blocks

- Compact and robust 6 function multitool - Resin body - Lightweight design - Hardened steel bits - 6 functions - Hex: 3, 4, 5 and 6 - Screwdrivers: PH2 and Flat

- 22 function mini tool - PRO’s most comprehensive mini tool - 12-speed compatible - Includes 12-speed chain tool - Integrated tyre lever - Alloy construction - Hardened steel bits

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

The FCT-1 is a versatile tool for easy and damage-free removal of suspension fork caps, which can be difficult to remove by hand when overtightened. The six sides of the FCT-1 correspond to the most popular fork cap designs for a snug and secure fit. Compatible with select suspension top caps from the following manufacturers: - FOX® - RockShox® - DVO® - Marzocchi® - Öhlins® NOTE: Do not use the FCT-1 to overtighten fork caps. Always follow manufacturer recommendations for fork cap installation.

Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.

Park's Side Cutter Pliers are professional quality, 7-inches long, and made from heat-treated, forged chromoly steel for crisp, easy cuts and durability. They boast soft-touch, dual-density handles for an excellent grip, too.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

Park Tool's Utility Pick Set is a set of three unique, multi-purpose picks ideal for a wide variety of detail work. Features: • Aluminum handle with magnet • Picks are replaceable, cold formed, heat treated and polished high carbon steel • Set includes 1-straight, 1-hook and 1-90 degree pick

The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube.

Never get stuck without a Multi Tool on a ride ever again.

- 2, 2.5, 3, 4, 5, 6, 8mm
- T25 Torx
- Flat Head Screwdriver
- A stripped down version of the EDC tool containing a 9 function multi-tool neatly stored in your steerer tube
- Very easy to install without removing your star nut or threading your steerer tube

The EDC PLUG KIT is the perfect addition to the EDC tool system. The tire plug Jabber Tool threads directly into the EDC carrier (SOLD SEPARATELY). The Jabber Tool and bacon strips store perfectly within the small EDC capsule ready for race day deployment.

- The EDC (Everyday Carry) tool contains essential trailside tools and can be stored in your steerer tube/stem or EDC pump for easy access. Plug kit (OU9505) can be added to fix punctures quickly - Updated EDC tool is easier to remove from storage, has an updated, more durable steel chain breaker and stronger steel spoke keys - Multi-tool features: 2,3,4,5,6,8 hex keys, T25 Torx, flathead screwdriver and EDC top cap tool. Ultra compact and super lightweight (58g) - Tire lever/chain breaker also features 0, 1, 2 & 3 spoke keys, Presta valve core remover & spare rotor bolt - Carrier features: spare quick link storage and ability to thread in a 12,16 or 20g CO2 cartridge OR a sealed storage capsule (small and large included) - Small storage capsule stores the jabber and preloaded bacon strip keeping it stickier for longer and can be installed inside of large capsule for separating items. EDC tool with small storage capsule is small enough to fit inside 70cc pump - EDC tool with large storage capsule fits inside 100cc pump as well as steerer tube storage options - Backwards compatible with all EDC V1 tool storage options - Steerer inner diameter must be between 24.25mm—24.80mm (gauge included) - 130g total weight - Third party online sales are strictly prohibited by manufacturer

- Featuring all five Muc-Off brushes in a handy storage bag - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels - Wheel and component brush ideal to clean rim and spokes with ease - Two-prong brush ideal to reach hard-to-shift dirt on your components

Precision brake bleeding tools and adaptor kits for Magura brake systems. - Consumer level bleed kit

The Ultimate Tire Lever. The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel. Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use Unique “thumb flange” makes it easy to apply pressure to the tire bead Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims

- Reversible left/right entry bottle cage design - Tire plug tool + 2 plugs - Tire lever - Third party online sales strictly prohibited by manufacture

- Tube / gear storage with hook-and-loop strap - 2, 2.5, 3, 4, 5, 6, 8mm hex - T10, T25 torx tools - Flat screwdriver - Tire plug tool + 4 plugs - Tire lever - Chain tool - Spoke wrenches 0, 1, 2 - Valve core tool - CO2 head - Fits a spare chain link + 16/20/25g CO2 or Crankbrothers Klic HV pump, sold separately - Optimized width for maximum pedaling clearance - Third party online sales strictly prohibited by manufacture

- A CNC machined chain wear tool that is compatible with most chains including SRAM flat top chains
- Measures from the center of the chain roller for an accurate output instead of the side of the chain
- Also able to measure the lateral wear/play of a chain which is common in 1x drivetrains due to the extreme angles
- Compatible with all chains
- Abbey Tools are priced to be used as shop tools, not for resale
- Made in the USA: Bend, Oregon

- This Carbon Piston Press is the safest way to reset hydraulic brake pistons when installing new pads (also serves as a bleed block)
- Unlike screwdrivers or levers that can crack ceramic pistons or damage seals, this tool applies even pressure across both pistons at once
- It pushes evenly across the piston faces, ensuring concentric and parallel retraction into the caliper bore, minimizing seal stress and avoiding the tilt that often occurs with improvised lever methods
- Made from carbon-fiber reinforced polymer with titanium hardware, it’s built for durability and effortless pad changes

- This Carbon Piston Press is the safest way to reset hydraulic brake pistons when installing new pads (also serves as a bleed block)
- Unlike screwdrivers or levers that can crack ceramic pistons or damage seals, this tool applies even pressure across both pistons at once
- It pushes evenly across the piston faces, ensuring concentric and parallel retraction into the caliper bore, minimizing seal stress and avoiding the tilt that often occurs with improvised lever methods
- Made from carbon-fiber reinforced polymer with titanium hardware, it’s built for durability and effortless pad changes

- A slim, strong multi-tool with 11 functions for common bike repairs and everyday needs - Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. It is small enough to fit into a riding tool wrap or pocket, and has an optional key ring attachment to fit on any keychain for use away from the bike - All bits are ED-coated and corrosion-resistant - Magnets keep all bits in place and secure - Ball detent swivel head tested to over 40Nm of torque - Same bits as 8-Bit System and EnCase System multi-tools - Includes: Six bits with eleven functions: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits

8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

- The 8-Bit Tire Lever + Multi-Tools have two functions and can be nested with the 8-Bit Pack Pliers - Multi-tools in the 8-Bit System attach to each other with magnets and short pins - Plastic tire lever is compatible with tubed and tubeless tires

Wolf Tooth Components, 8-Bit, Multi-Tools, Number of Tools: 3, Tire lever +Disc tool Add-On

8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on

- Minimalist, lightweight multi-tool option stored at the end of an axle during rides for easy access during quick adjustments and trailside repairs. - On one side of the handle is a 5mm hex end stepped to 6mm - Compatible with Wolf Tooth rear axles that have threaded axle bolt (091000). - Four double sided bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible - Two double-sided hex bits can nest on the inside of the handle via magnet

-Mminimalist, lightweight option to cover essential tool functions. It is stored at the end of an axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes - On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for two double-sided hex bits that nest on the inside of the handle via magnet - Compatible with Wolf Tooth axles that have threaded axle bolt - Includes: Four bits: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible, hex adapter

Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with aircraft grade aluminum. - Large finger notches so you can start threading the cups by hand - 3/8" square socket or 1" hex for ratchet/torque wrench - Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets - Steel inserts for magnetic coupling compatibility with the Pack Wrench

Wolf Tooth bottom bracket sockets are tools for installation and removal of external cup bottom brackets. They are machined in Minnesota with aircraft grade aluminum. - Large finger notches so you can start threading the cups by hand - 3/8" square socket or 1" hex for ratchet/torque wrench - Most sockets have either a Shimano bearing preload tool or a 16mm hex for use with Race Face Cinch cranksets - Steel inserts for magnetic coupling compatibility with the Pack Wrench

This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. - Compatible with any cassette up to and including 12 speed cassettes - Design and manufactured in Minneapolis, MN USA - 7075-T6 Aluminum

This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30

Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes